XR6T-F6   PLENUM CHAMBER

  BA BF  XR6T -  F6 - Turbo teritory

 

 

 

$1445   mirror polished

$1395   powdercoated black/silver

$1345   raw alloy -

 

  This plenum chamber is a replacement top section of the XR6T inlet manifold.

The tight, restrictive & poor flowing top section is removed and replaced for

improved throttle response and higher power output levels.

 

Working from basic plenum sizing theories and flow characteristics, a large

formed alloy plenum was chosen for simplicity, while still retaining great internal flow

and cylinder filling. A must for improving low down throttle response and high

power out put.

 

Throttle body is placed at the end for ultra short piping and allowing for even

 airpressure across the cylinders.

The plenum bolts directly to the factory lower section, from under the plenum

(no unsafe internal studs) and mounts the throttle body off to the right. No need to

remove the lower manifold section, injectors or fuel rail.

Fitting is made easy as a result.

 

Comes powder coated satin black for a stealth, factory look or high gloss silver,

and FPV style blue is also available.

 

Made in Austraila by Plazmaman Racing

The tight, restrictive & poor flowing top section is removed and replaced for

improved throttle response and higher power output levels.

 

Working from basic plenum sizing theories and flow characteristics, a large

formed alloy plenum was chosen for simplicity, while still retaining great internal flow

and cylinder filling. A must for improving low down throttle response and high

power out put.

 

Throttle body is placed at the end for ultra short piping and allowing for even

 airpressure across the cylinders.

The plenum bolts directly to the factory lower section, from under the plenum

(no unsafe internal studs) and mounts the throttle body off to the right. No need to

remove the lower manifold section, injectors or fuel rail.

Fitting is made easy as a result.

 

Comes powder coated satin black for a stealth, factory look or high gloss silver,

and FPV style blue is also available.

 

Made in Austraila by Plazmaman Racing

The tight, restrictive & poor flowing top section is removed and replaced for

improved throttle response and higher power output levels.

 

Working from basic plenum sizing theories and flow characteristics, a large

formed alloy plenum was chosen for simplicity, while still retaining great internal flow

and cylinder filling. A must for improving low down throttle response and high

power out put.

 

Throttle body is placed at the end for ultra short piping and allowing for even

 airpressure across the cylinders.

The plenum bolts directly to the factory lower section, from under the plenum

(no unsafe internal studs) and mounts the throttle body off to the right. No need to

remove the lower manifold section, injectors or fuel rail.

Fitting is made easy as a result.

 

Comes powder coated satin black for a stealth, factory look or high gloss silver,

and FPV style blue is also available.